What Are Glycol Chiller Systems?

Across the UK, glycol chiller systems support industries that rely on accurate temperature regulation. From breweries and dairies to laboratories and manufacturing plants, these systems provide stable and controlled cooling using a glycol-water mixture as the heat transfer medium.

Unlike standard water chillers, glycol chillers use a mixture of propylene or ethylene glycol combined with water. This makes them suitable for applications operating below 0°C or installations with outdoor pipework exposed to cold weather.

At a fundamental level, glycol chiller systems extract unwanted heat via a closed refrigeration cycle. The cooled glycol solution is then circulated to the load, where it collects process heat and returns to repeat the cycle.

How a Glycol Chiller System Works

A well-considered glycol chiller system design supports efficiency and stable operation. Core components typically include:

• Compressor


• Heat rejection condenser


• Evaporator


• Metering device


• Glycol reservoir and pump


• Control panel

Within the evaporator, the refrigeration cycle removes heat from the circulating glycol solution. The chilled solution is then sent to the process load, absorbs heat, and flows back to the unit.

A typical glycol chiller system diagram shows two distinct circuits. The refrigeration loop manages heat removal, while the glycol loop delivers cooling to the equipment or product. Accurate schematics are valuable for installation, servicing and fault finding.

Glycol Chiller System Control Panel

The glycol chiller system control panel acts as the operational centre of the system. Modern panels typically include:

• Digital temperature controllers


• PLC or microprocessor interfaces


• High and low pressure safety switches


• Circulation pump management


• Fault indication systems


• Remote monitoring capabilities

The control panel manages compressor cycling, supervises operating conditions and ensures safety limits are maintained. Many systems also log performance data to support service planning and operational records.

In facilities requiring precise cooling, reliable control minimises fluctuations that might compromise process stability.

Installing a Glycol Chiller System Control Panel

Proper glycol chiller system control panel installation is essential for consistent performance and regulatory compliance. Key factors include:

• Electrical compliance – The panel should be installed in accordance with UK standards, with correct breaker sizing and safe isolation points.


• Location and ventilation – Installation should avoid damp conditions and excessive ambient temperatures.


• Commissioning procedures – Qualified engineers should verify sensor calibration, test alarms and confirm pressure switch operation.

Commissioning ensures the unit operates in line with the original glycol chiller system design specifications.

Key Factors in System Design

Effective glycol chiller system design begins with accurate assessment of the cooling load. Engineers evaluate:

• Target operating temperatures


• Flow rate and pipe sizing


• External temperature influences


• System resilience planning


• Future expansion potential

Correct sizing is essential to avoid inefficiency or inadequate cooling. Load calculations must consider peak demand and operational cycles.

Fluid selection also plays a role. Food-related industries often favour propylene glycol for safety reasons, whereas ethylene glycol may be selected for industrial environments requiring improved heat transfer efficiency.

Additional considerations such as insulation standards, pump capacity and exchanger design influence stability, efficiency and lifespan.

Applications of Glycol Chiller Systems

Glycol chiller systems support numerous sectors across the UK, including:

• Beer and spirit production


• Food manufacturing plants


• Medical and laboratory facilities


• Laser and medical equipment cooling


• Plastics processing and injection moulding


• Cold storage and preparation areas

For example, in beverage production, chillers maintain fermentation temperatures and cool storage tanks. In manufacturing settings, they protect equipment from excessive thermal build-up.

Protecting System Performance

Routine maintenance supports consistent output and equipment longevity. Typical servicing tasks include:

• Testing fluid concentration and condition


• Assessing circulation components


• Removing debris from heat rejection surfaces


• Reviewing operational parameters


• Confirming correct refrigeration performance

Over time, glycol can lose effectiveness through dilution or contamination, reducing heat transfer efficiency. Regular testing helps maintain optimal performance.

When correctly designed, installed and maintained, glycol chiller systems can provide reliable service for many years.

Common Queries About Glycol Chiller Systems

What is the typical glycol percentage?

The required percentage depends on freeze protection and operating temperature, commonly ranging from 20–40%.

Is external installation possible?

Outdoor installation is possible when the system is designed for external conditions.

What makes glycol systems different?

Unlike water-only systems, glycol-based chillers resist freezing and support sub-zero applications.

Is remote access available?

Advanced control panels often provide remote monitoring and data logging functionality.

What is the recommended testing frequency?

Annual testing is common, though high-demand systems may require more frequent checks.

Which industries benefit most from glycol chillers?

Food production, beverage processing, pharmaceuticals and precision engineering rely heavily on glycol cooling.

Final Considerations

Glycol chiller systems deliver dependable cooling performance across a broad range of industrial and commercial applications. From accurate load calculation and correct commissioning through to routine servicing, every stage affects efficiency and longevity.

Whether planning a new installation or upgrading existing equipment, working with experienced specialists ensures compliance with UK standards and operational requirements. For technical advice and tailored solutions, consult the Newsome glycol chillers page to explore engineered glycol cooling solutions designed for long-term performance.